And, we get a brief history about “the Golden Age of Doorbells”
We asked Robert to tell us about his passion for chime doorbells and the company he built around them.
When did you start ElectraChime?
I made my first long chime doorbell in 2004. I could not find one in stores. And the one I bought on ebay was in terrible condition—folks just don’t part with installed long chime doorbells that work. I started ElectraChime that same year.
Above: ElectraChime Ribbon Long Chime Doorbell with two brass bells in doorbell niche.
Click the video “go” and hear the doorbell sound!Halloween trick or treating to doorbell business
There is a grand house on the street where I grew up. My brother and I rang their doorbell once a year—on Halloween. All the other houses in the neighborhood had doorbells that sounded ordinary. This doorbell was enchanting. When the kindly couple opened the door, I marveled at the still resonating, beautiful, long bells. That doorbell was a treat for the eyes and ears. Every bit as good as the candy! I always wanted a long chime doorbell.
While remodeling my own home I looked in every home center for a long chime door bell. There were none to be found. All I found were cheap doorbells absolutely lacking in appearance and sound. Even worse, most new door chimes were electronic chimes that beeped and chirped. Long Chime doorbells were simply not available. And vintage long chime doorbells were surprisingly scarce, and even if you do find one, the bells are usually cracked and the mechanisms no longer functional. So, I set out to craft my own.
After long hours hunched over a workbench, a new chime was born. After seeing mine, an acquaintance with an empty chime niche crying out for a new doorbell asked for one. I built another and ElectraChime was born.
Inspiration from the “Golden Age” of doorbells
Above: ElectraChime long bell door chimes are suitable for a variety of decors.
The 1930s, 40s and 50s, were a “golden age” of long chime doorbells. Some of the finest Industrial Designers of the 20th Century, including Norman Bel Geddes and Russel Wright, lent their considerable talents to doorbell manufacturers. Builders often installed shallow niches in finer homes to showcase a long bell door chime. Sadly, a combination of price pressure and electronics decimated the long chime doorbell market. Today, many doorbell niches sit empty or have a tired doorbell. This leaves renovators scrambling to find a suitable doorbell.
ElectraChimes fill this market void while taking design queues from the “golden era” of door chimes. There’s an ElectraChime for every decor.
The Coronet chime features traditional crown molding and suits Colonial, Victorian and Traditional homes. Empire was inspired by the marquetry and curves of a 1930s console radio. The Comet has the minimalist optimism of the 1950s and features an atomic-faced clock. The Metro and Ribbon door chimes suit a variety of styles. Chimes with brass tubes have a more traditional look, while nickel plated-brass bells complement bright metal hardware and stainless steel appliances.
There are no rules so I always advise people to choose the chime they like best.
Some of my most rewarding experiences come from building a custom doorbell out of trim or floorboards salvaged from a renovation project. And when a client builds a new niche especially for an ElectraChime, I smile from ear-to-ear.
Do you make ElectraChimes yourself?
Above: Here, ElectraChime Metro doorbell covers get their first coat of varnish.
Yes, I handcraft every ElectraChime doorbell myself in California.
For the tubular bells, I use a brass alloy selected for its acoustic quality. Each set of bells is individually tuned then I radially polish the bells to a satin finish. Many of today’s renovators opt for nickel hardware and stainless steel appliances, so I just introduced satin polished nickel-plated bells. Brass bells are more traditional while nickel-plated bells provide a retro-modern look.
For the cases that protects the mechanism and wiring, I use hardwoods sourced from sustainable forests. Walnut and Cherry are particular favorites.
The low voltage electrical mechanisms that strike the bells are hand assembled with high quality hardware. They feature a micro-adjustment to insure that each bell is struck perfectly for a long resonance.
How’s business?
Selling long chime doorbells is a niche business—sorry, the pun is unavoidable. I find there’s an ever increasing awareness of, and a longing for, the elegance of the past. Many customers relate fond memories of a door chime they remember from their youth. Renovators usually look for a doorbell towards the end of a project at about the same time they are installing, or reinstall, house hardware. I’m only too happy to oblige them with an ElectraChime.
I tell people that making doorbells is so much fun it doesn’t even feel like working. And it keeps me busy. You can find ElectraChimes installed in all 50 U.S. States and on every continent. There are ElectraChimes in capital cities and remote farm houses. I wish I could visit them all!
What is the difference between two- and three-tube doorbells? What about the finish on the bells?
All ElectraChime doorbells ring “ding-dong” for the front door and “ding” for the rear door. The center bell is decorative and has no effect on the sound. Both Brass and Nickel-plated brass tubular bells ring the same rich notes with a lasting resonance
The center bell in ElectraChime doorbells is entirely decorative. All ElectraChime doorbells ring “ding-dong” for the front door and “ding” for an optional third bell. When a caller presses the doorbell button, a striker hits the shorter tube to produce the “ding” and when the button is released, the striker recoils to hit the longer tube for the “dong”.
Nickel and brass bells both ring the same, crisp, traditional notes with rich tones and a long sustain. ElectraChime brass bells are polished to a satin finish that provides an elegant luster. Brass bells are clear coated to prevent tarnish. Nickel-plated brass bells are brass bells plated with a thin coat of nickel to provide a silver color. The plating has no distinquishable affect on the tone.
Even though the mechanics and sounds of two- and three-tube doorbells are identical, the aesthetics are quite different.
A three bell chime presents a fuller look. On doorbells with larger covers, this can provide extra balance. The same cover looks more modern, and perhaps a bit less formal with two tubes. So if you subscribe to a minimalist design philosophy, a two bell doorbell assures the form follows function.
In Feng Shui, even numbers give Yin energy and odd numbers Yang. Thus, a two bell chime has more feminine energy while a three bell chime has more masculine energy. Design principals hold that odd number compositions—and in particular the rule of three—add motion and interest. This can be explained that your eye and brain can’t pair odd numbers of elements.
I’m not certain I’ve provided much clarity to the subject of two or three bells or just muddied the waters a little bit more. And I’ll so my best to resist creating my own doctrine of the “ding and the dong”. So I will just leave you with this old saying I just made up:
“Your house is your castle, so furnish it as you will.”
Zen and the Art of Ringing Doorbells
There’s an entire feedback loop involved in ringing a doorbell.
You probably may not have thought much about the simple act of ringing a doorbell, however when you break it down into the experience for the caller outside, and the residents inside, the home, there’s quite a bit to it.
When you ring somebody’s doorbell, you are asking to be invited into their home. You want to make a good impression, and so does the host. From the caller’s perspective, you want the doorbell to be heard outside of the house so you are certain the occupants have actually been summoned. Think back on how many times you have rung a doorbell only to knock because you didn’t know whether the doorbell was working?
As the occupant behind the front door, you obviously need to hear the doorbell. But you don’t want the sound to assault your ears. And you want your guests to have a good impression and a pleasant wait.
A long chime doorbell provides the best possible experience for all concerned. The luxurious long notes are loud enough to be heard outside so it makes your house sound welcoming. Inside the house, you and your family are alerted of guests by the harmonious sound of real bells.
And when you greet your guests and they finally see your elegant doorbell, the Zen is complete. A 1930’s marketer of long bell door chimes summed it up with this flowing copy:
“A thrill for the visitor, satisfaction and pride for the owner… rich, melodious tones that vibrate throughout the house. Callers so not soon forget so distinctive a greeting.”
Noise Enemy Number 1
After electric lights, doorbells were often the second residential electrical appliance in a home. Early doorbells were exactly that: bells that sounded like a fire alarm. Sure, they alerted you that somebody was at the door, but it was like hitting you over the head with a hammer! In the 1930s door chimes arrived that produced their sound by striking one or more tubular bells or metal xylophone-like tone bars.
Door chimes produce the ubiquitous “ding-dong” sound we know today. Thus door chimes were marketed to combat “doorbell nerves” and “Public Noise Enemy #1”.
For more, please see my sister site, the Doorbell Museum.
As someone who had a “buzzer” style doorbell at their last house, I can attest to likening it to getting hit over the head by a hammer. It was a jarring buzz that often times sent my mug of coffee flying, jolted me out of my comfortable spot on the couch or at the very least gave me quite a startle. In my 1962 ranch house, the original doorbell has more of a chimey ding dong to it, which is much more soothing. That said: It sure would be wonderful to have a bell like Robert’s ElectraChimes that let me know if my visitor was at the front or back door. For now, I’ll have to resort to following the dog, who always seems to have a sixth sense letting him know which door is hiding our guest.
Mega thanks to Robert for sharing his extensive knowledge about doorbells, sharing his story and sharing this source for musical sounding, made in America, beautifully hand crafted vintage style chime doorbells.
Pam wants to add, she also is really pleased to now have a better understanding of why three’s work the way they do in design — our brain can’t organize those odd-numbered whatevers into pairs. Brilliant!
Link love:
joseph nannariello says
Hi,
During a recent renovation the top of my bell was lost.
Its a mid 60’s Rittenhouse, is there anyway you can help me replace it?
Its a rectangle clock that slipped over the top.
I could send pictures of the chimes and mechanism hanging on the wall.
Thanks Joe
Pam Kueber says
Hi Joseph, please contact Robert directly. The bold blue text = hotlinks to his website.
Sarah says
I have a 1940home and the electronic mechanism that makes the chime sound on my electrachime doorbell is broke . Would you be able to sell me the mechanism only?
Pam Kueber says
Hi Sarah, contact Electrachime directly to see if they can help. The blue text = hotlinks.
Liz Renaud says
We have a ~ 1940 Edwards door chime and are looking for directions pamphlet, a schematic diagram, to wire the chimes.
Pam Kueber says
Liz, we don’t have info like that. On issues that involve wiring: Consult with a pro.
Liz Renaud says
Thanks Pam. We have an electrician. The issue at hand is specific to the schematic for the Edwards chime wiring and including the function of each terminal on the device, not how to attach it, for example, to the door bell button or electric panel. We contacted the Edwards company, and they no longer have information for this antique chime.
Rhonda Hulteen says
Have a house built in 1917. Found all but one of 4 tubular chimes for door bell. It was made by Rittenhouse. Need the middle C chime shld be 40″ or less and slightly over 1″ in diameter Have pics; it works, just requires the shortest chime. Love its sound even w only 3 chimes – but wldnt 4 be wonderful!!!! Thank you for any assistance.
Lynda kelly says
Hi. I bought a beautiful 2chime doorbell from you. We moved and part of the mechanism is missing. I would like to buy another. Could you contact me. We spoke on the phone before. Absolutely love this and anxious to put it up again. Thanks. Lynda
Carol Walsh says
I have a Rittenhouse doorbell chime that no longer has a “dong” after the painters finished. When cleaning up after they left, I found a spring and a broken black piece that resembles a washer. The model number is RC383. I would like to put this back in working condition but need instructions and probably a few new parts. Can you help me out?
brenda says
That’s what happened to my vintage doorbell. Decorators came in and then bell stopped working. On inspection that spring and plunger was missing. Eventually bought a new Tubular doorbell and 1yr later decorators came in and low and behold plunger was there but no spring. Near impossible to find part so had to purchase another. Not going to happen anymore – if painters or decorators are in – must remember to remove the plunger and spring and put in a safe place
laura Lamiroult says
I have a 1930’s bungalow and have been looking for a chime bell with a deeper sound than is available and deeper sounding than the one on the site.
What does it take to achieve this and can you help supply or advise?
Thank you
Bill says
I have a vintage long electric door bell but it has a Ding and no Dong. It has a new 12v transformer. How can I get the Dong? Will I have to replace the whole door bell unit? My house was built in the 30’s. Thanks if you can help.
An Nguyen says
Hi Bill,
I had the same problem with my 1950 Nutone K28 and did figure out and fixed it myself. I guess you have to post its model and maker so other may share the info.
My 2-cent.
pam kueber says
Bill, perhaps you should reach out to Electra Chime directly to see if they can help with this.
lisa marchese says
how do i get doorbells?
pam kueber says
Hi Lisa, there was a link to Electrachime at the top of the story but I also just added one at the bottom to make it easier. Here you go: http://electrachime.com/
An Nguyen says
Hi Nancy, would you want to replace with the new one or just to fix them?
Regards,
An