I am super excited at the new mosaic flooring I discovered at Daltile this weekend while poking around their website. These can be found in their Keystones collection.
These three new choices now to go to #1 among all possible flooring choices for 50s and 60s homes. Guys, the American Olean Chloe is nice, but not nearly as correct for the postwar period. (It’s a holdover from the 30s and early 40s.) Drats, 5 years too late for my 3 bathrooms. Oh well.
FYI, the very first design shown — “Random” — is by far my favorite. I cannot tell from the online material whether different variations of white are possible. I know we tend to think that all the whites must match – but I don’t think it’s a must, particularly when it comes to the floor.
Ring the bell, put out a press release, this is BIG wonderful news for the retro renovation community.
Basil says
Dear Pam,
I am considering in using American Olean “Chloe” (black square, pinwheel style) for my bathroom.
My house was built in 1946 – Melbourne, Australia, however I’m not sure exactly what period the “Chloe” floor pattern style was used.
Could you please advise if the “Chloe” floor tile would suit my house that was built straight after WWII.
Thanks,
Basil.
Jason says
I have the white 1″ hex tiles in my bathroom, and they ARE hard to keep clean, especially with six dogs and cats. The previous owners used WHITE grout, and it’s no longer white. It’s a dirty color that I cannot clean. Do what Pam suggested and go with a dark grout. It also makes the shapes of the tiles stand out more.
Of course, this isn’t going to stop me from using the same tile in my new bathroom (currently being built). 😉 The look is worth it.
I’ve seen the 1″ hex tiles (white with the black “flowers” and black border) in a kitchen before, and I thought it looked great. But I don’t think it was original.
Amy says
I really like those but I wonder how the housekeepers kept them clean back then seeing as they’re quiet light coloured?
50sPam says
Stephan, Thanks for confirming the mix-and-match question, makes total sense. FYI, the AO Chloe tiles in my bathrooms are a Satin (matte) glazed finish. One bathroom has a black dot – which even is glossy. We have not had slip ‘n slide issues, though – because we use fluffy rugs (which I also consider accessories adding color, of course). I agree, though, if you want to step out directly onto the tile – no glaze! And no glaze INSIDE a shower floor.
What about a bigger but still boutiquey tilemaker like Ann Sacks? (sp?) Maybe they would have unglazed arctic white 4×4?
Palm Springs Stephan says
Pam, I would never mix-and-match tile finishes on a single surface. I am using all through-color tile, all matte finish on the floor. Glazed tile would pose a slipping safety hazard in a bath area, I think. I’m still trying to find the larger size … I need to shclepp halfway across the state to B&W Tile to see if they can custom make some for me. If they cannot, I’m going to use four 2x2s laid together in a square to create the illusion of a 4×4. The walls (different surface) are 4×4 glazed arctic white, though.
Note to Femme1 : I do not recall ever seeing a ceramic or porcelain tile kitchen floor (I’m 50, and I’ve been in a lot of houses older than I am). Every kitchen floor I have ever seen was always some kind of plastic-like substance (linoleum, asphalt tile, vinyl tile, etc) with a pattern on it to make it look like tile. I would be very interested if any of the other site visitors have ever seen actual ceramic tile on an authentic mid-century modern kitchen floor.
50sPam says
Amy, it’s the grout (not the tile) that you have worry about keeping clean. In general – I recommend going as dark as you can with the grout. If the tile is white, a warm grey can look really great. Also, you then need to seal the grout. Finally – you need to keep the floor vacuumed – that is the best prevention, in my experience. There is actually more I could write about this fascinating subject of grout. I’ll get after it someday!
50sPam says
Femme 1, I think you could never ever keep the grout clean in a kitchen.
Femme1 says
You know, I’m wondering if these tile styles were ever used in any other rooms besides bathrooms. Would they be too small-scale for a kitchen?
50sPam says
So Stephan — did you mix the thru-color tile with larger glazed 4x4s? Will it look okay to mix and match these finishes?
Palm Springs Stephan says
Having dealt extensively Dal-Tile over the past couple of months, I can say that yes, there are at least 3 or 4 shades of white that are available, from whitest “Arctic White” to an off-white “Biscuit.” BUT … those whites are available in through-color (the color goes all the way through and is not simply a glaze layer) porcelain floor tile in only 1×1 and 2×2, nothing larger. But the good news is that you can choose multiple colors and Dal-Tile will assemble the tiles into the pattern of your choice and attach it to large sheets of webbing for easy installation. If you can find the local Dal-Tile distributor, rather than an outlet, you can also custom design your own pattern. So if you see a photograph of an authentic 1950s pattern, as I did on this site, you can take that photo to the Dal-Tile distributor and they will make the pattern in your choice of colors. It takes about 6 weeks and costs a bit more, but it was worth it.