• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Home
  • Kitchens
  • Bathrooms
  • Blog
  • Exterior
  • Other Rooms
  • Decorate
  • The “Museum”
  • Be Safe/Renovate Safe
Retro Renovation
Retro Renovation

Retro Renovation

Remodel & decorate in Mid Century Style

  • Home
  • Kitchens
  • Bathrooms
  • Blog
  • Exterior
  • Other Rooms
  • Decorate
  • The “Museum”
  • Be Safe/Renovate Safe
Home / The History of Vintage Steel Kitchen Cabinets — 100 brands!

The History of Vintage Steel Kitchen Cabinets — 100 brands!

Pam Kueber

Yes, steel is sturdy … steel is modern … and in post-World-War II America, steel was arguably the hottest choice for materials for the home. During the war, America had ramped up tremendous capacity in steel production so that we could produce weaponry. Afterward, all the production had to find a new outlet. Where did it go? To big ‘ole American cars, but also into the American home — for appliances, home construction, and, yes, kitchen cabinets.

On this page, I’ll share some of the history of steel kitchen cabinets that I have picked up from watching, reading and collecting since 2002. The image above: From a U.S. Steel ad promoting the benefits steel to American consumers. It worked.

1876 kitchen (Library of Congress LC-USZ62-1857)

“Vermin-proof”: The history of postwar steel kitchen cabinets in fact starts decades before. I’ve spotted “hoosier cabinets” from as early as the 1920s that were made of steel. These were promoted as “vermin proof.” Cleanliness was a big concern for homemakers in earlier parts of American history. For example, the whole notion of “Sanitary Kitchens” was very important. Remember, we had no vaccine for polio, for example, until the mid-50s, and the flu epidemic in 1914-1918 killed 450,000 people in the U.S. and up to 70 million worldwide. Rats and mice could not eat through steel — so if you had a metal hoosier (or at minimum, a metal flour bin) they couldn’t get into your foodstuffs and contaminate them.

  • A separate, related big story: I’m cataloguing all the brands we’ve identified to date in my The Retro Renovation® Encyclopedia of Vintage Steel Kitchen Cabinets.

Fitted steel kitchen cabinets as early as 1926

early steel kitchen cabinets murphy cabranettes

The earliest date I’ve been able to verify for steel kitchen cabinet is 1926 — for Murphy Cabranettes made by the Murphy Door Bed Company. This has been a very important discovery in my research so far — 1926! As you can see, these cabinets are installed into what I’d call a deco or even a bit Arts & Crafts kitchen. Fascinating: There were seven colorway available.  

Whitehead-work-saving-kitchen-1939

Haute 1930s designs set the stage: Additional early example of fitted or steel kitchens that I have spotted have been in the 1930s, in very high-end homes shown at expositions. Among the very early brands were Whitehead/Monel (c. 1937 shown above), Servel, Elgin, Dieterich, and St. Charles. These cabinets had a deco/streamline look. One of the things that distinguishes many of them from “mid century modern” designs is that doors and drawers were inset, rather than full overlay (although not in all cases.)

fallingwater kitchen st. charles steel

Frank Lloyd Wright was an early fan of steel kitchen cabinets: Frank Lloyd Wright seems to have been a relatively early adopter of steel kitchen cabinets, which certainly must have given steel cabinets a popularity boost. Above: Wright chose St. Charles Steel Kitchen Cabinets. My research indicates that St. Charles cabinets came into being in 1935, when St. Charles bought Janes & Kirtland, maker of the “White House Line” steel “dressers”. Photo from the Library of Congress HABS. 

  • More name-dropping provenance: Famed industrial designers including Norman Bel Geddes (Servel steel kitchens) and Raymond Loewy (American Kitchens, Crosley All Steel Kitchens) designed for this market.

Saving for the American Dream Kitchen: Folks liked these 1930s steel kitchens — they were a huge advancement over the farmhouse and apartment kitchens most people lived with. But prior to WWII, people simply couldn’t afford them, because of the Depression. During the war, though, employment rebounded to support the war effort — but, there was nothing much to buy, due to rationing. So, women and men alike were able to save a lot of money to spend after the war. Manufacturers, meanwhile, had all their factories dedicated to wartime production. But, they knew that after the war, they would return to a consumer-driven marketplace. So they “primed the pump” by running ads like the one above — encouraging American women to save for the dream home they’d always wanted — and that started with the American Dream Kitchen.

Postwar building boom: After the war, steel kitchen cabinets became very popular. They were offered as standard in the famous Levittown houses, for example. My sense is that they were “high end” — but not out-of-reach, at least in the first decade after the war ended. Remember, there was a lot of steel capacity. Interestingly, coming out of the war there were some 6 million people who needed housing. We couldn’t build houses quickly enough. But, the houses were quite small by today’s standards — often starting at 700 s.f. and not much more than 1,000 s.f.  And, there continued to be materials shortages due to the demand. I have read, for example, that you could only build one bathroom, unless you got some sort of special dispensation. I have not verified this, though.

How metal kitchen cabinets were sold:

Often, a salesman came to the prospective buyers’ house to talk with them about buying the kitchen. The salesman’s tools included miniature cabinets that could be put together to create a kitchen to fit the homeowners’ space. 

lyon steel kitchen cabinets salesmans sample kit

Video: My Lyon kitchen cabinets Salesman’s Sample Set

Videa above ^^ These model kitchens — which came in traveling cases — are very collectible. I have about a half dozen different models including this rare set of pot iron Lyon demo cabinets.

I also have an amazing salesman’s sample kit — with the presentation materials — for Republic Steel Kitchen Cabinets. See the set here.

colors for st charles kitchen cabinets
1957 St. Charles Kitchen Cabinets

Colors for vintage steel kitchen cabinets:

Kitchen colors in the early post-war years: Before 1953, most steel kitchen cabinets were white, and in fact, we see a lot of patriotic red, white and blue imagery in advertising for these early postwar-era kitchens. Kitchens had a cheery, almost primary-color look. For a late 1940s early 1950s kitchen, I might recommend real linoleum floors and wallpaper with flowers rather than googie atomic graphics. Sweetness.

St. Charles steel kitchen cabinets lilac purple

Metal kitchen cabinet colors in from 1953-1963: It wasn’t until about 1953 that things started to settle down, construction-wise, in America. Then, homes started getting bigger, and fancier… and American culture started to get more modern. From 1953 through 1963 — a period dubbed the Populuxe (affiliate link) years in this terrific book, which I highly recommend — we then start seeing pastel-colored kitchens (just like cars). Heading into the 60s, we also saw two-tone kitchens like the 1957 St. Charles, above. Exuberance was the word to describe the Populuxe years, and American kitchens of that period. In fact, I also would describe these as the glory days for steel kitchen cabinets. For 1953-1963 kitchens, I would tend to recommend VCT flooring in tiles or sheets, and wallpaper with atomic references.

The Big Three steel kitchen cabinet companies:

During the glory years, I’d say that there was a “Big Three of metal kitchen cabinets”: 1. Youngstown. 2. Geneva. 3. St. Charles. Please note that this calculation is “anecdotal” based on experience since 2002. Some day I’ll try to figure out where the data are. 

youngstown steel kitchen cabinets sink base

Youngstown Kitchens: 

Above: Here is a typical Youngstown sink base. It’s “early years” most likely. Immediately after WWII, a lot of homemakers would just buy this unit, a sink base with integral drainboard sink. The idea was that you could add the additional pieces later. Youngstowns were the biggest sellers in the 50s — they were marketed nationwide.  The early Youngstowns have a distinctive pull. And later, they introduced their “Diana” line, which is identifiable because of the big red emblem on the sink with the goddess Diana the huntress figured in. Johnstown steel kitchen cabinets may also have really been Youngstowns with a different label. I don’t know how much of this re-marketing went on, but I suspect there was more of it than just this example. Youngtown cabinets were a brand of Mullins Manufacturing outside Youngstown, Ohio; the brand was later sold to American-Standard. A retro-famous video of the Youngstown “Mullinaires” featured a chorus singing a jingle made for Youngstown and presented at a company dealer convention, I presume.

Pam’s vintage Geneva kitchen, photo copyright Kit Latham

Geneva Kitchens:

Geneva cabinets were #2 in the marketplace, I’d say, judging from what’s for sale in the “used” market today. The early Genevas are very distinctive because their chrome pulls are recessed with a little plastic backplates behind them. Over time these backplates become yellowed, brittle and even broken. There is no known suitable replacement, although I have heard of people 3-D printing them. Later Genevas — like my 1963 aquamarine Genevas above — do not have the recessed/backplate design. Harrison steel cabinets also look suspiciously like Genevas.

st charles steel kitchen cainbets

St. Charles Kitchens:

Anecdotally, I have heard that St. Charles kitchens were considered “cream of the crop” within the steel kitchen cabinet market. That said, I think my Genevas are terrific, and I’ve seen other cabinets that look darn nice. (While there surely must have been quality variation manufacturer-to-manufacturer and perhaps even year-to-year, we have no definitive research on this.) St. Charles was the longest running steel cabinet maker. The company ceased to exist for a few years in the 2000’s, but then the Viking Range Company bought the brand and has reintroduced them into the market. But then, they discontinued them.

Garth and Martha had their vintage Crosley kitchen cabinets professional stripped and repainted. Their interior: Retro-modern.

Other brands, from Acme… to Homart (Sears)… to Morton… to Yorktown:

Often with the help of readers — thank you! — I’ve identified 90+ different brand names of steel kitchen cabinets back in the day. Significant nameplates that renovators are actively searching out are: GE, Republic, American, Crosley (pictured above), Beauty Queen, and Morton. It’s my sense that many of the smaller brands were local or regional, from the days when interstate highways and interstate commerce were still young. 

Mid century kitchen cabinets designed by Raymond Loewy

Famed industrial designer Raymond Loewy designed the American brand of kitchen cabinets, shown above, along with all the appliances to with it, I believe. The faucet for that sink can still be found today as a replacement item: 

That faucet is a specialty item, and you can still get a replacement today – check Locke Plumbing.

100 brands of vintage steel kitchen cabinets identified!:

  • I’m cataloguing all the brands we’ve identified to date in my The Retro Renovation® Encyclopedia of Vintage Steel Kitchen Cabinets

replica GE steel children's kitchen playset

Steel kitchen cabinets for children’s play kitchens too:

Of course, there were miniatures made for the kids, too — like the GE Little Miss Structo kitchen complete with miniature GE cabinettes. Be aware: There may be hazards like lead paint in vintage items. Be Safe/Renovate Safe!

Steel bathroom vanities:

Yes, there were steel vanities for the bathroom, too. This is a Beauty Queen “Lavanette.” We still see a few of them around. Note, a bathroom vanity is generally going to be only 21″ deep. Most of the steel kitchen cabinets are about the same as today’s cabinetry — 24″ deep and 34.5″ tall.

A word on “fitted kitchens”:

capitol steel kitchen with pebbled finish

The postwar era was the first time in history when “fitted kitchens” were widely available and affordable to consumers. A “fitted” kitchen means that all the cabinets, stove, refrigerator, dishwasher, and countertop are all seamlessly connected generally in a long, continuous line.  This was all a big step forward for the American housewife — she had more working and storage space then ever, as well as modern appliances that made her work easier. She still worked a lot of hours, of course — as household help became a thing of the past and as expectations for cleanliness and doting on the children rose.

Steel kitchens and wood kitchens — at war:

Reading marketing materials from the period, it seems that the steel marketers and wood marketers were always duking it out for supremacy. Toward the late 50s, wood started to win. While steel might last forever, it dented, it could rust, it showed fingerprints, and to get that fabulous, glossy auto-grade finish you really must disassemble your cabinets and take them to the pros for repainting. I also suspect that as steel production found newer markets, it started to get significantly more expensive compared to wood. On the other hand, wood is easy to repaint, and it has a “warm” aspect vs. the antiseptic feel that steel can sometimes convey. As a result of this war, you start to see steel cabinet makers try new things with their designs to bridge the gap. The 1955 Capitol kitchen had a “nubbly” finish to prevent fingerprints; I’ve seen a similar textured finish on Genevas and seen it reference as late as 1977 in St. Charles ads. 

youngstown woodcharm cabinets

Market leader Youngstown introduced several designs of cabinets with steel boxes and wood doors.

Above: The American brand cabinets have steel boxes with coppertone drawers and wood doors. Kind of “best of both” metal and wood. The coppertone, by the way = reference to Early American decor.

vintage-steel-kitchen cabinets
vintage-steel-kitchen cabinets ad

Above: This St. Charles set had painted steel cabinets on the bottom and wood-door/steel-box cabinets up top. In this case, the wall cabinet doors are painted white, with yellow trim. From Craiglist, featured courtesy of seller (link long gone) — this exact kitchen design was actually featured in a St. Charles ad.  We’ve also seen them plain maple. Again — evidence of the steel-vs-wood war going on… and the transition to wood cabinetry as the winner in the battle overall.

Open-concept kitchen pushes “furniture-like” cabinetry:

Further explaining the preference swing to wood that was under way in America as we headed toward the 1960s: As the kitchen became increasingly open to the family room, which reflected an increasingly more casual American lifestyle, cabinetry in the kitchen started to be designed to look more like furniture in order to merge with the adjacent space. This also pointed to wood as the material of choice.

As time went on, heck, steel kitchen cabinet makers started caving altogether and went to wood doors on steel boxes. Above — Youngstowns… see the complete Youngstown Monterey brochure here.

There was a frenzy to get these wood-doored-St. Charles’ when we spotted them and posted them on Retro Renovation. That door trim = apparently it’s stainless steel. Gorgeous.

1978 st charles kitchen cabinets

Above: By 1978 we even had St. Charles cabinets with wood doors on steel frames like this.  

By the mid-60s, for all these reasons and maybe more I haven’t figured out yet, steel cabinets faded as the kitchen cabinets of choice. Of course, there was still groovy steel in the kitchen: In the form of avocado green, harvest gold, coppertone brown and even orange stoves, rangetops, ovens, refrigerators and dishwashers. Thank goodness. Above: 1968 wood kitchen. Heart.

Were steel kitchen cabinets an important part of mid-century design history? Museums think so. Above: Historic New England removed this barely-used upstairs metal kitchen from a home near Boston to put into their permanent collection.

Steel kitchen cabinets today:

Fast forward 45 years to the 21st century, and steel kitchen cabinets have made somewhat of a comeback. In 2008 the same company that makes Viking ranges re-introduced St. Charles steel kitchen cabinets to the market. They came in 23 powder coated colors and stainless steel (above). But, they did not seem to be targeted at the retro market — they were high-end. I believe that in Europe, steel kitchen cabinets are also available, and like current-day St. Charles, high-end. Viking discontinued the St. Charles brand in early 2012.

Other places to buy steel kitchen cabinets made today: See my story on where to buy steel kitchen cabinets manufactured today here.

You can also get these WOOD reproductions of vintage “English Rose” cabinets made by John Lewis of Hungerford in England. There also seems to be a market for vintage English Rose’s in the U.K. There are two other British vintage brands I’ve identified: Paul and Anemone.

REVO oven

Oh, and look at this vintage English Rose REVO oven that surfaced for sale on ebay in 2012. So interesting to see a built-in oven that is so detailed to look like the cabinets. Such was the inventiveness of the time.

It took me five years to find the cabinets for my kitchen. I laid it out on Excel. I had 68 vintage cabinets — and made it work by the skin of my teeth. I sold my extras.

Interest in metal kitchen cabinets is growing:

Here in the U.S. there seems to be a growing community of people trying to collect and restore vintage metal kitchen cabinets. This can be a journey… an endeavor… yes, a trial… because it can take a while to hunt down enough used cabinets to fit the configuration that you need. Some readers have collected three kitchens just to get the pieces they need. Many have driven, like, 15 hours there and 15 hours back to get the sets they want. 

The key, if you want to find these cabinets and make them your own: Patience. Doing these kinds of projects is a real hassle… you must have the mindset to take it on… if you do, the results can be very gratifying. It took me FIVE YEARS to find my vintage Geneva steel kitchen cabinets. I almost gave up, and had pursued bids on MDF cabinets to paint aquamarine. Then, at the 11th hour, the retro decorating gods sent me 68 steel cabinets, original aquamarine finish, that had once been used by nuns to teach cooking. My kitchen has been featured in two magazines and all over the intranet. Moreover — the pursuit is what led me to create this blog. Over those five years of searching, I gathered so much info on vintage steel kitchen cabinets and the other elements to pull the kitchen together, that I decided to create the blog to share the info with others.

Want to see and learn even more about steel kitchen cabinets?

See the Steel Kitchen Cabinets Category — which includes all the posts I’ve ever done about metal kitchen cabinets. There are lots.

Whew. That’s it. Now, here is an FAQ.

FAQs:

Buying

  • Where can I go to buy or sell vintage metal kitchen cabinets?
  • How much are steel kitchen cabinets worth?
  • How do I make vintage metal kitchen cabinets fit into my kitchen?

Restoring Vintage Steel Kitchen Cabinets

#1 Renovate Safe: Like other original features in a vintage house, vintage steel kitchen cabinets can contain materials that require environmental and safety precautions.  So when undertaking your restoration project, be sure to consult with professionals regarding the materials used in construction and painting of the cabinets, how to deal safely with them, and also about the proper disposal of debris, etc. See our Be Safe/Renovate Safe page… the EPA hosts a complete website on lead in the home and a complete website on asbestos in the home.

Following is some of the experiences shared by other readers.

Professional painting and stripping

  • I have not personally tested the various methods of stripping or painting or done extensive research on the topic — I am not an expert in this topic. I will relay some of what’s been conveyed by some readers as background information only. CONSULT WITH LICENSED PROFESSIONALS about what to do for your cabinets. And remember, there may be vintage nastiness in the cabinets such as lead paint so be sure to Be Safe/Renovate Safe — work with licensed professionals to test all materials and layers before messing with them and so you can make informed decisions how to handle.
  • Professional methods that readers have used to paint their cabinets include working with local shops that do industrial painting (various methods) and working with auto body shops. Regarding the various possible methods, I recommend you do your own research. A few things that have come up in comments in the past: We’ve heard of doors warping under high heat; one reader said he had been told by powder-coaters that heat in the bake ovens is so high it might cause the stiffener within the doors of his cabinets to catch fire; and ask how they will get the paint off — is there the potential their process will “pit” the doors?

DIY refinishing

  • This is not a DIY or fixit site. There are probably a variety of DIY methods you could try, but I am not an expert. Again, CONSULT with PROPERLY LICENSED PROFESSIONALS to assess what you are working with — is there lead paint, for example? And what’s in any filler material? — and then to get informed on how to handle including safe removal of debris, etc. For more info, see our Be Safe / Renovate Safe page… and the EPA hosts a website on lead in the home, etc.

Color choices

  • See my page on Paint Colors for lots of authentic mid-century paint color choices, including palettes from vintage St. Charles and Geneva.

Where do I get parts?

  • What about countertops and steel / metal countertop edging? Yes, you can get vintage-style laminate and metal edging in either stainless steel or aluminum. See my Laminates and Countertop Edging Page for complete resources. Or try the Search box at the top.
  • Where do I get hinges for my metal kitchen cabinets? No known sources. I had hoped one of the “pivot hinges” in this site would work. But I don’t think so. Don’t ever throw out a cabinet until you’ve salvaged the hinges and rollers, too. Dumpster diving, watching trash piles, buying cabinets at salvage just for parts, etc., sound like the route you will have to take.
  • Where do I get rollers or parts for the drawers for my metal kitchen cabinets? Same as above – although there might be tricks to this if you are handy.
  • Where do I get plastic backplates for vintage Geneva kitchen cabinets? No current source. Scrounge up old ones. Replicate them on a 3D printer…
  • Where do I get handles for my metal kitchen cabinets? Key is knowing the “spread” of your pulls. If it’s 3″, it will be relatively easy to replace them. If it’s 2-3/4″, much harder and likely, more expensive. To see all identified options to date – see the Category called “Cabinet Hardware”.

Lots more to learn about vintage steel kitchen cabinets:

  • I’m cataloguing all the brands we’ve identified to date in my The Retro Renovation® Encyclopedia of Vintage Steel Kitchen Cabinets, with lots of links to stories by brand.

Reader Interactions

Comments are closed. 

196 comments

Comments

  1. Misti says

    February 22, 2019 at 4:59 am

    I just purchased a home that has steel cabinetry and a big sink like the ones in your youngstown cabinet photos. I’ve looked around the site a while and haven’t seen the answer to my questions yet. So here goes:
    1. Was it common to have white cabinets and a powder blue sink? I’m concerned that the white cabinets may have been repainted at some point and they are really dented from years of abuse.

    • Pam Kueber says

      February 22, 2019 at 6:53 am

      I can’t say that I’ve seen the combo of white cabinets with blue sink often, or ever. In fact, a powder blue kitchen sink would be pretty rare, I’d say….

  2. Wendy Hoechstetter says

    February 11, 2019 at 8:06 am

    Our turn-of-the-century home that my mother bought in around 1966 had steel cabinetry – and a one piece stainless steel countertop with integral drainboards and double stainless steel sinks. I have never, ever come across a better countertop or sink than that combo, and I would give my eyeteeth to be able to have another one.

    I’m glad they are being made again; now I just have to get back into a home of my own! Or at least find some clients who want them 😉

    I adored the cabinetry, too, but apparently my mother didn’t, because at some point around the early 80s or so, she had the cabinet doors and drawer fronts removed and replaced with some awful melamine-covered wood product things. Which was pretty shocking in and of itself because otherwise, she had superb taste. I was simply horrified, and to this day can’t figure what got into her. I dream of an all steel kitchen. In the same color as yours, actually 😉

  3. Chris says

    December 26, 2018 at 4:08 pm

    We just moved into a 1952 home, kitchen is original except appliances. The cabinets are white painted steel, with wire rack shelves that are pitted and look terrible. They slide into the cabinets on metal slide guides. What do you all recommend for replacement wire rack shelves? I’ve been coming up with nothing on Google searches. My SO wants to get particle board shelves to rest on top of the slide guides but I think that is a bad idea adding more weight to something that’s rather heavy hanging on the wall studs as it is.

    • Pam Kueber says

      December 28, 2018 at 7:44 am

      Hi Chris, I don’t know the answer to this one…

  4. Ginene says

    December 4, 2018 at 12:15 am

    “By the mid-60s, for all these reasons and maybe more I haven’t figured out yet, steel cabinets faded as the kitchen cabinets of choice. Of course, there was still groovy steel in the kitchen: In the form of avocado green, harvest gold, coppertone brown and even orange stoves, rangetops, ovens, refrigerators and dishwashers. Thank goodness. Above: 1968 wood kitchen. Heart.”‘
    Pam, Retro Renovation is one of my favorite sites and someone may have mentioned this in the comments. I’ve got to tell that the Earth Colors, orange, Avacado, Harvest Gold, etc. didn’t make the scene until the 1970s, not the 1960s.
    Love your work.

    • Pam Kueber says

      December 4, 2018 at 7:31 am

      I recall that avocado came on board circa 1968.

  5. Elisabeth Eickhoff says

    November 28, 2018 at 10:55 am

    Thanks so much for this article! My 1930 English cottage revival home in Memphis TN has a fantastic early Youngstown metal kitchen and I love it. The layout is perfect, and it’s just “loved” enough to have character and charm galore. I see why previous owners just kept and loved it. You can’t improve on its perfection. Only thing it needs is some better quality wood or metal countertops – the current laminate is rather lacking – I’m currently searching for options.

    • Pam Kueber says

      November 28, 2018 at 11:39 am

      Hi Elisabeth, thank you for your kind words. See this category for all our research on retro countertop options, this is one product I try to really stay on top off — hey, Retro Renovation for Wilsonart laminate, perhaps???: https://retrorenovation.com/category/kitchen/countertops/

  6. Bob Schuler says

    November 2, 2018 at 12:25 pm

    I’m trying to find a replacement switch for the under cabinet light, that is original equipment on my St. Charles cabinet.

    • Pam Kueber says

      November 3, 2018 at 12:43 pm

      Hi Bob, I don’t know the answer to this.

  7. Ann Lesar says

    September 30, 2018 at 11:46 am

    We live in the Cumberland Mountain valley of East Tennessee with lots of forest critters. Your comments about vermin proof steel cabinets are why we have kept and love our 1933-34 Elgin kitchen cabinets. We are always on the lookout for panels and handles just in case we need replacement parts.

  8. Debbie says

    September 30, 2018 at 10:25 am

    My mom’s house in Chicago had metal cabinets and the sink in your article. Ours were white, not shiny and did not show fingerprints.
    Maybe it’s because I had them for 20+ years.
    They are basically indestructible. With almost no attention, they last forever

  9. Julie Ann Woods says

    August 13, 2018 at 3:18 pm

    See my attached file with photos of my willow green Geneva kitchen constructed in 1966 in Pueblo, CO. We would like to replace the wall oven with a new stainless 30″ double oven. The problem is that the cabinet is only 27″ wide. Do you know if Geneva made wider oven cabinets to accommodate a 30″ oven? Any idea where I could find one? Love your blog. Thanks for your response.

    • Pam Kueber says

      August 14, 2018 at 8:54 am

      Hi Julie Ann,

      What a beautiful kitchen! I don’t know the answer to your question off-hand, but give me time and I’ll add it to my list to go find some brochures to see if I can find out.

      Meanwhile, seems like if you widen that cabinet to 30″, you will then have to increase the size of the soffit/bulkhead above, and then what about that electric baseboard heater. All would entail more expense and hassle.

      Perhaps you can get your existing oven fixed? Possible resources here: https://retrorenovation.com/2011/08/29/parts-service-and-advice-to-fix-old-stoves-and-other-vintage-appliances-a-list-of-9-online-resources/

      Good luck.

  10. Justas says

    July 20, 2018 at 10:54 am

    Hi,

    anyone have thought or try to stip down the paint, polish the metal and leave bare metal ? Maybe some one has some pics?

    • Pam Kueber says

      July 21, 2018 at 7:21 am

      It will rust and pit and otherwise discolor without a finish on it. Someone tried…. Also, be sure to Renovate Safe https://retrorenovation.com/renovate-safe/

« Older Comments
Newer Comments »

Primary Sidebar


Footer

Follow Along

  • Facebook
  • Instagram
  • RENOVATE SAFE
  • About
  • Blog
  • The “Museum”
  • Kitchens
  • Bathrooms
  • Exterior
  • Other Rooms
  • Terms of Service
  • Privacy Notice
  • Disclosures
  • Contact

© 2023 Retro Renovation® • All Rights Reserved • Website by Anchored Design
Please do not use any materials without prior permission. Portrait by Keith Talley Photography